darkfiber
10-03-2007, 11:35 AM
If you have a Tivo Series 2, Tivo Series 3 or TivoHD you can get the new 9.1 software by putting in your Tivo Service Number (TSN) on this page...
http://research.tivo.com/91priority/index.htm
I have had it for around 2 days. Seems to work fine on my Series 3.
NEW FEATURES
Advanced wishlists
No longer need to re-setup 30-sec skip following a reboot
(NOTE: The 1st time you boot up with 9.1 you still have to setup 30SS but after that rebooting will not disable it.)
Has foundation for MRV/TTG between S2/S3/THD units (S3/THD MRV/TTG to be activated in November)
S3 units (THD units already had this): Diagnostics menus now contains real time updating information
S3 units now have the hybrid mode previously only available on THD units: 1080p+1080i->1080i, 720p->720p, SD->480p
(This is good for TVs that don't support 480i for HDMI inputs)
S3 units (THD units already had this): Easy CableCard menu toggling: Under CableCARD N menu, you can switch between CableCARD 1/2 by pressing 1/2
S3/THD units: Improved Emergency Alert System handling - will resume recording once EAM completes among other changes.
Crestron support for S3
BUG FIXES
THD units now have significantly improved grid guide performance compared to their previous version.
closed captioning lost after insert commercials bug (http://www.tivocommunity.com/tivo-vb/showthread.php?p=5550158#post5550158)
NEW BUGS
FF/REW and 30-sec skip on S3/THD units have some delays/freezes compared to 8.3 software
Lockup occurs if attempt is made to edit a manual recording for a clear QAM channel on season pass list.
NOTE: This issue does not affect those with CableCards. It is discussed in this thread:
http://www.tivocommunity.com/tivo-v...ad.php?t=368153 (http://www.tivocommunity.com/tivo-vb/showthread.php?t=368153)
http://research.tivo.com/91priority/index.htm
I have had it for around 2 days. Seems to work fine on my Series 3.
NEW FEATURES
Advanced wishlists
No longer need to re-setup 30-sec skip following a reboot
(NOTE: The 1st time you boot up with 9.1 you still have to setup 30SS but after that rebooting will not disable it.)
Has foundation for MRV/TTG between S2/S3/THD units (S3/THD MRV/TTG to be activated in November)
S3 units (THD units already had this): Diagnostics menus now contains real time updating information
S3 units now have the hybrid mode previously only available on THD units: 1080p+1080i->1080i, 720p->720p, SD->480p
(This is good for TVs that don't support 480i for HDMI inputs)
S3 units (THD units already had this): Easy CableCard menu toggling: Under CableCARD N menu, you can switch between CableCARD 1/2 by pressing 1/2
S3/THD units: Improved Emergency Alert System handling - will resume recording once EAM completes among other changes.
Crestron support for S3
BUG FIXES
THD units now have significantly improved grid guide performance compared to their previous version.
closed captioning lost after insert commercials bug (http://www.tivocommunity.com/tivo-vb/showthread.php?p=5550158#post5550158)
NEW BUGS
FF/REW and 30-sec skip on S3/THD units have some delays/freezes compared to 8.3 software
Lockup occurs if attempt is made to edit a manual recording for a clear QAM channel on season pass list.
NOTE: This issue does not affect those with CableCards. It is discussed in this thread:
http://www.tivocommunity.com/tivo-v...ad.php?t=368153 (http://www.tivocommunity.com/tivo-vb/showthread.php?t=368153)